Facades, feature walls and large plantings that change their look for holidays or events need a flood light that can move between white and color. The CLS E02B is a 25 watt integrated LED flood in die-cast brass that produces 1500 lumens, tunes white from 2700K to 5000K and mixes RGB color.
How is color and brightness controlled?
A Bluetooth module pairs each fixture with the Tuya app, where you set white temperature, pick colors and dim from 1 to 100 percent. The app supports group control so several floods can change together, plus a music sync mode for events.
Is 25 watts too much for a residential facade?
At 1500 lumens this fixture is sized for broad surfaces, tall walls and large canopies. Because it dims down in the app, one model can cover both a strong wash for a large wall and a lower setting for a nearby bed. For a single shrub or small feature, a smaller integrated up light is usually the better fit.
What should I plan for on the transformer side?
The E02B runs on 12 to 17 volts AC or DC. At 25 watts per fixture, a few of these add up quickly, so total the load and keep headroom on the transformer. The housing is IP65 rated with a clear tempered glass lens and a 72 inch 18 gauge SPT-1W lead.
Specifications
| CLS part number | E02B |
|---|---|
| Light source | Integrated LED, RGBWW |
| Wattage | 25W |
| Lumens | 1500 lm |
| White color temperature | 2700K to 5000K adjustable |
| Control | Bluetooth, Tuya app |
| Dimming | 1 to 100 percent |
| Input voltage | 12 to 17V AC/DC |
| Construction | Die-cast brass |
| Finish | Antique Bronze |
| Lens | Clear tempered high temperature glass |
| IP rating | IP65 |
| Lead wire | 72″ SPT-1W 18 gauge |
Specifications are published by CLS Outdoor Environments and are subject to change without notice. Confirm critical dimensions and ratings with LED Spot before ordering.
See more LED flood lighting, and use the low voltage wire calculator to confirm the run can carry several 25 watt fixtures.
Reviews
There are no reviews yet.