CLS IFL0240 High Power Solid Cast Aluminum LED Flood Light (40W)

Large facades, wide lawns and expansive commercial grounds need broad, heavy output from a fixture that still runs on a low voltage system. The CLS IFL0240 is a 40 watt integrated LED flood light in die-cast aluminum, rated at 3300 lumens with a 120 degree spread.

Is 3300 lumens too much for a residential job?

On a typical home it often is. This fixture is aimed at large surfaces and wide open areas where several smaller floods would otherwise be needed. For a single tree or a short wall, a lower wattage flood is usually the better match.

Which color temperature should I pick for a building face?

CLS offers 2700K, 3000K and 4000K. Warm 2700K and 3000K flatter brick, stucco and wood. 4000K suits modern facades, signs and areas where a cleaner white helps visibility. CRI is rated at 85.

What does a 40 watt flood mean for the transformer and cable?

A single fixture this size takes a real share of a transformer, so give it its own run where possible and check the drop at the fixture. It runs on 9 to 17 volts AC or DC, is rated IP65 and comes with a 72 inch lead.

Specifications

Specifications are published by CLS Outdoor Environments and are subject to change without notice. Confirm critical dimensions and ratings with LED Spot before ordering.

See lower wattage options in our landscape flood lights range, and size the dedicated run with the low voltage wire calculator.