Where lighting ideas turn into real lighting solutions

Request a Quote

LED Drivers

Replacement and specification drivers, constant current and constant voltage, for fixtures and retrofit projects.

Home › Lighting Products › Lighting Accessories › LED Drivers

Every LED fixture has a driver, and when a fixture fails, the driver is the most common culprit while the LEDs themselves are usually fine. This range covers replacement and project drivers, constant current and constant voltage, dimmable and fixed, because replacing one driver beats replacing a whole fixture that is otherwise healthy.

Shop LED Drivers

Showing 10–11 of 11 results

About Our LED Drivers

Whether it’s low voltage, high voltage, electronic, or magnetic, LED Spot has a driver for your project. Browse our wide selection of LED and plug-in drivers that complement a variety of indoor and outdoor fixtures. Please note that the items in this section are non-returnable if less than 5 items are purchased. Terms and conditions also apply.

Constant Current or Constant Voltage

The two driver families are not interchangeable. Constant current drivers feed LED modules directly and are matched by output current and voltage window. Constant voltage drivers feed 12 or 24 volt systems, tape runs and fixtures that regulate themselves.
The failed driver’s label carries everything needed to match it: input, output type, current or voltage, and wattage. Photograph it before ordering and matching is simple.

Dimming Compatibility

Dimmable LED systems fail at the pairing, not usually at either component: a driver and a dimmer that do not speak the same dimming method flicker, pop or refuse to dim low. Match the driver’s dimming type to the control on the wall.
Tell us what control the space uses, and we will match a driver that behaves under it.

Why Fixtures Die and Drivers Save Them

Heat is the killer of drivers, which is why they fail before diode arrays do. A fixture that goes dark, flickers or hums after years of service usually needs a driver, not a dumpster. Swapping the driver returns the fixture to service for a fraction of replacement.
For fleet owners, stocking spare drivers for your standard fixtures turns failures into quick maintenance instead of procurement events.

Frequently Asked Questions

Match the failed driver’s label: input voltage, output type, output current or voltage, and wattage. Send a photo and we will identify it.

Constant current drivers feed LED modules directly. Constant voltage feeds 12 or 24 volt systems and tape. They are not interchangeable.

Usually a driver and dimmer mismatch. The dimming method on both must agree. We can match a compatible driver.

Usually yes. Drivers fail before LEDs do, and a swap returns the fixture to service at far lower cost.

Yes, in the common dimming types, alongside fixed output models.

Free Photometric Design

Send us your dimensions and we will model fixture placement and light levels at no charge, before you commit.

Ready to Get Started?

Request a quote on any item, or call and talk it through with someone who specs these every day at (281) 972-5006.

Request a Quote