Vertical Pole Mounts
Side-of-pole brackets with an upright 2-3/8 inch tenon for adding a slipfitter or knuckle fixture to light poles or wood poles.
Home › Lighting Products › Parking Lot Lighting & Poles › Light Pole Accessories › Vertical Pole Mounts
A vertical pole mount attaches to the side of a pole and gives you an upright 2-3/8 inch OD tenon at whatever height you choose. It is the simple way to add a second fixture below the main heads, or to put light on a pole that never carried one. LED Spot stocks two versions: the LS-PMV for standard light poles and the LS-WPB for wood poles. Both take standard slipfitters and adjustable knuckle arms, and both come in bronze, black, green or white powder coat. The wood pole version is a common pick for horse arenas and parking areas. Plan the added fixture in a photometric design so it fills gaps instead of adding glare.
Shop Vertical Pole Mounts
-
Vertical Pole MountVertical Pole Mount
$80.38 Select options This product has multiple variants. The options may be chosen on the product page -
Vertical Pole MountVertical Pole Mount for Wood Poles
$77.00 Select options This product has multiple variants. The options may be chosen on the product page
Which Vertical Pole Mount Fits Your Pole?
Start with what the pole is made of, then match the fixture.
- Wood or not. Wood poles take the LS-WPB. Every other light pole takes the LS-PMV.
- Fixture bracket. Both tenons are 2-3/8 inch OD, so a slipfitter goes on directly and an adjustable knuckle arm fits as listed. Yoke fixtures need a yoke tenon mount on top.
- Mounting height. The mount can go anywhere on the pole. Leave room so the new fixture does not shade or glare into the main heads.
- Wire path. Plan how power reaches the new head before you pick the height, since a hand hole or conduit run often decides it.
If your fixture needs a tenon that points out sideways, look at the horizontal pole mount.
Vertical Pole Mounts Questions
Yes. The LS-WPB vertical pole mount is made for wood poles and gives you a 2-3/8 inch OD tenon for a slipfitter or knuckle arm. If the pole belongs to a utility company, get their approval before attaching anything.
Fixtures with a standard slipfitter for a 2-3/8 inch OD tenon, and fixtures with an adjustable knuckle arm. Yoke-mounted floods can go on with a yoke fixture tenon mount.
Yes, it can be placed at any point on the pole. Pick a height that leaves clearance from the main fixtures and that you can wire to without trouble, and count the extra fixture in the pole’s wind load.
Both the LS-PMV and LS-WPB come in bronze, black, green or white powder coat. Most buyers match the pole so the bracket blends in.
Total the EPA of everything already on the pole, add the new fixture and its mount, and compare that with the pole’s rated EPA at your site wind speed. If the total stays at or below the rating, the pole has room. Our pole selection guide shows the full order of checks, and why EPA wind ratings matter explains what the rating means.
Pole Mounting Guides and Resources
How to choose a pole: pick the fixture and bracket, look up the fixture EPA, then match pole height to the wind load at your site.
What a fixture EPA wind rating means and when it decides which pole, arm and fixture combination will work.
Why lighter, flatter LED fixtures changed the wind load that poles and arms have to carry.
A step-by-step checklist for a complete light pole order, from pole type and height to shaft size and wall gauge.
Related categories: light pole accessories | horizontal pole mounts | knuckle fixture tenon mounts | yoke fixture tenon mounts | commercial light poles
Ready to Get Started?
Request a quote on any item, or call and talk it through with someone who specs these every day at (281) 972-5006.